Environmental Fluid Mechanics
Theories and Applications
Sponsored by the Fluids Committee of the Engineering Mechanics Division of ASCE. This report provides environmental engineers with a comprehensive...
Recent Advances in Optimal Structural Design
Sponsored by the Technical Committee on Structural Design of the Technical Administrative Committee on Analysis and Computation of the Technical Activities Division of the Structural Engineering...
Physical Model of Current-Induced Scour at Ventura Harbor
This paper describes a 1:25-scale movable-bed physical model study of scour resulting from longshore current passing through a narrow gap on the leeside of the detached breakwater at Ventura...
Comparison of Hydrodynamic Parameters for a Floating Breakwater
The U. S. Army Engineer Research and Development Center is in the process of developing a Rapidly Installed Breakwater System (RIBS) for use in Joint Logistics Over the Shore Operations...
Montioring and Modeling of Tandem Breakwater System at Hammond, IN
A tandem breakwater system was constructed in 1989-90 to provide protection for a large marina at Hammond, IN, at the south end of Lake Michigan. A five year monitoring program (1993-98),...
Design and Construction of the Pier J Breakwaters at the Port of Long Beach, California
Several different alternatives to mitigate surge activity were investigated. The most acceptable solution was a pair of new breakwaters that altered the basin geometry to change the basin...
Depth Measurement Using Remotely Sensed Data, Specifically A
The compact airborne spectrographic imager (casi) is what is referred to as an imaging spectrometer. This is an optical device that is mounted on an aircraft and used to collect high resolution...
Raising the Bar - 345kV Uprating
The paper presents solutions to increasing the transfer capacity (book rating) of two critical 345kV tie lines. Described are computer modeling techniques using laser survey data coupled...
Uses and Limitations of Conventional Hydraulic Models in the Planning and Design of Storage Tunnels
The hydraulic design of storage tunnels requires special considerations relative to the design of conventional sewers. These issues include characterization and control of inflows, energy...
An Aggressive I/I Abatement Program is Underway as Part of Vallejos Wet Weather Program
The Vallejo Sanitation and Flood Control District (VSFCD) is undertaking an aggressive pilot program to control wet weather flows and eliminate sanitary sewer overflows (SSOs) that are...
Buffalo Cove Water Management Unit, Atchafalaya Basin, LA: A Case Study
The Atchafalaya Basin is a system undergoing change in topography and subsequently, hydraulics and hydrology. The U.S. Army Corps of Engineers funded and constructed an initial small-scale...
The Watershed Modeling System
The Watershed Modeling System (WMS) is a comprehensive environment for hydrologic analysis developed by the Environmental Modeling Research Laboratory (EMRL) at Brigham Young University...
Probabilistic Simplified and Detailed Subsurface Drainage Water Quality Modeling of Nitrate Leaching
A transparent uncertainty structure is derived for simplified and detailed conceptual nitrate leaching as a result of a probabilistic modelling procedure. The uncertainty structure consists...
Water Control Data System Modernization: Huntington District, Corps of Engineers
The Water Control Data System (WCDS) provides the tools that are used in making daily operational decisions for 35 reservoir projects and 9 navigation structures in Huntington District....
Sedimental Journey
A numerical shoreline evolution model was used to examine the shoreline changes associated with the release of 2.3 million m� of beach-quality sediment from behind Matilija Dam in Ventura...
Smart Online Structural Monitoring and Diagnosis
(abstract only) This paper describes the observation matrix as innovative monitoring and diagnosis: (1) The matrix elements of the observation matrix multiplied by its transposed serve...
A GIS Model for Assessing the Impact of Increased Channel Discharges on Hydraulic Geometry
A GIS model is being developed that can be used to assess the impact of increased channel discharges on the hydraulic geometry of streams in the Powder River (structural) Basin in northeast...
Optimization of the Operation Rules of Multipurpose Multireservoir Systems; New Approach
In recent years Iran is ranked 4th among countries having the highest number of dams under construction on her hydrosystems. This has called for...
Water Yield Responses to High and Low Spatial Resolution Climate Change Scenarios in the Missouri River Basin
Water yield responses to two climate change scenarios of different spatial scales were compared. Responses were determined by applying the Soil and Water Assessment Tool (SWAT) hydrologic...
International Journal of Geomechanics
The International Journal of Geomechanics (IJOG) focuses on geomechanics with emphasis on theoretical aspects, including computational and analytical methods and related validations. Applications of interdisciplinary...
Return to search